How to Replace the Replacement Key Battery For the Saab 9-3
Saab owners have a unique procedure to add another key. This requires the use of a handheld computer called Tech-2, to be used by the dealer. Then it is necessary to purchase a new transponder. key must be purchased.
Make sure to rotate your keys in order to prevent one from wearing out more than another. This will keep your keys in good condition.
Replacement Case
The new key fobs do not look like the older Saab keys. They have electronics that make them difficult to copy. This has made theft of cars significantly more difficult than 20 years ago. But, it has also made the replacement of lost keys a more expensive undertaking.
Every owner of a Saab 9-3 needs to have at least two working keys. If one gets lost, it is expensive to add another to the car since it requires replacing the CIM module and reprogramming the locking cylinders. Dealers typically charge between $100 and $200 to do this.
There are ways to cut down on the high cost. Certain parts suppliers will utilize the code of the spare key to cut a new metal blade for a fraction of what the dealer charges. The key must, however, be the same as the original in order to function within your car.
Follow these steps to replace the case. You'll need an flathead screwdriver and patience. With how to get a saab replacement key , slowly pry the plastic apart and separate the emergency keys from the case. Once you have the case open, remove the electronic components and place them into your new case. Place the key with the correct badge inside the case.
Replacement Battery
The Saab 9-3 replacement battery is a budget component that can be quickly and easily replaced. This YouTube tutorial for DIY Cyclone Cyd shows how to replace the battery of the remote key fob in just four steps. This tutorial is compatible with any modern Saab key fob. However, the process may differ slightly.
This button is usually located next to the Saab logo on the back of the fob. This button is usually located on the back of the fob just below the Saab Logo. Next you will need the flathead screwdriver to insert into the small hole in this button. This should be enough to open the fob case to allow you to change the battery.
After you have installed the battery CR1632, you are able to rebuild your remote key fob. Then, you can program it into your car. The entire process should not take more than one hour. It's a simple process that doesn't require any special tools.
If you lose your key, the process is slightly more complicated but it is still able to be accomplished. The dealer needs to first determine the VIN of the vehicle and order the replacement TWICE module as well as key blade with the proper unique code. After that, they will have to cut the new key and then program it with a new software tool called MDI.
Replacement Key Fob
The key fob is equipped with an internal battery that is used to lock and unlock your car. The batteries are able to last for, and they will eventually go out of service. This is a common problem that happens to all cars, and the good news is that you can replace the batteries in a majority of key fobs without replacing the whole case. Amazon sells replacement fobs that have all the electronics in place. It is easy to open the case and replace the batteries. It's important to note that you'll have to take out the emergency key first, and you can do this by putting the small screwdriver flathead into the slot found in the middle of the case. The case should split when you move the screwdriver around it.
When you are ready to replace the keys, ensure you have a spare, because this can cut down the total cost by a substantial amount. If you have an extra key, ask the dealer to cut it and program it for your vehicle. This is less expensive than buying a new key fob.
It is possible to add a second key to your car in the event that you don't have one, but it requires a great deal of research and work. It costs a few hundred dollars to get a second car key. The computer of the car also needs to be programmed. This can be accomplished by a professional, however it's an expensive option for most owners.
Replacement Ignition
Contrary to earlier Saab vehicles, the latest SAAB 9-3 models have a much more sophisticated alarm system that is dependent on a coded keys. If you lose your sole key, it may be expensive to add another one since the car must have a special computer added and also be programmed to accept a new key. Locksmiths typically aren't able to program this, and even a dealer will charge several hundreds of dollars just to program the new key!
Dealers will charge you the highest price to replace your car's computer (also known as the CIM or SAAB twice) If you lose your only functioning key. Instead, we can reprogram the EEPROM in your current car computer, preparing it for an additional key, saving you over 50% of what you'll have to pay at a dealership.
If you've been a long-time owner of a 03-11 SAAB 9-3, then you likely realize that the ignition key isn't all that robust. They can become incredibly sticky and the buttons are known to be ripped off at times which is why you should think about buying a new one if the one you have isn't functioning properly. Luckily, replacing the ignition key isn't as difficult as it seems and can be done in a short time with the proper tools.